Filter
Top Products
Page - 10
The eMCee software controls Kaidan hardware via a serial interface and in
order for eMCee to function properly it must be able to gain solitary control
of the serial port being used. System Extensions that monitor the serial ports
for activity will deny eMCee solitary control of the serial port. Extensions like
3rd party print drivers or Palm Pilot’s Hot Sync that are constantly running,
will prevent eMCee accessing the serial port.
For Macintosh users: Under the Apple Menu, go to Control Panels - Exten-
sions Manger. In the Extensions Manager, deselect the extensions that you
want to disable. Restart your computer. If you are not sure of what exten-
sions may be causing this problem, follow these directions. Go to the Apple
Menu and select the Apple System Profiler. Create a new report,check off all
boxes in the dialog window and email the report to support@kaidan.com.
For PC users: Uninstall the extensions that may be conflicting with
eMCee.and restart your computer. If you are still experiencing problems please
get a profile of your system & drivers, and email it to support@kaidan.com.
EMCEE IS WORKING, BUT IT APPEARS THAT THE TURNTABLE/RIG IS NOT MOVING TO THE RIGHT
POSITION
?
If the motors are running under eMCee control but they appear not to be
positioning properly, you may need to check the preferences of the eMCee
software. eMCee ships with all Kaidan motorized products and there are dif-
ferent preference settings for each Kaidan model. The preferences for eMCee
can be set by running the appropriate default setting script for your paticular
Kaidan product. The default setting scripts are located in the “Scripts” folder
of your eMCee software package. You can also enter the preferences directly
through eMCee’s preferences panel, see chart below for values.
TM-400TM-400
TM-400TM-400
TM-400 X-Axis Y-Axis
Steps per Rev 20000 0
Intial Velocity 100 0
Slew Velocity 500 0
Ramp Slope 10 0
Move Speeds 500 0
Step Resolution Full 0
MT-84MT-84
MT-84MT-84
MT-84 X-Axis Y-Axis
Steps per Rev 126033 0
Intial Velocity 250 0
Slew Velocity 300 0
Ramp Slope 20 0
Move Speeds 300 0
Step Resolution Full 0
M-1501M-1501
M-1501M-1501
M-1501 X-Axis Y-Axis
Steps per Rev 12000 20000
Intial Velocity 100 100
Slew Velocity 500 300
Ramp Slope 10 10
Move Speeds 500 300
Step Resolution Full
C-60C-60
C-60C-60
C-60 X-Axis Y-Axis
Steps per Rev 20000 374810
Intial Velocity 100 100
Slew Velocity 500 700
Ramp Slope 15 15
Move Speeds 500 700
Step Resolution Full