JVC XV-THA55 Home Theater System User Manual


 
Basic operations
22
You can adjust the output level within the range from –10 to 10.
On the remote control:
Press S.WFR +/–.
NOTE
You can also make adjustments using the choice menu shown on the
TV screen. (A pg. 54)
The adjustments on a source take effect for the other sources.
You can adjust each enhancement level from the front speakers
within the range from –10 to 10.
On the remote control:
Press BASS +/– for bass sound.
Press TREBLE +/– for treble sound.
NOTE
You can also make adjustments using the choice menu shown on the
TV screen. (A pg. 53)
The adjustments on a source take effect for the other sources.
You can adjust bass/treble enhancement level only for front left/right
channel. However, the supplied speakers cannot add the effective
change to the bass sound because of their cutoff frequency even if the
bass sound adjustment is made. (A pg. 54)
To change the bass enhancement level more efficiently, adjust the
output level of the subwoofer. (A “Adjusting the output level of the
subwoofer”)
(When you change the front speakers to the larger ones and select
“LARGE” for the front speakers in the SIZE sub-menu (A pg. 54),
the effective adjustment of bass sound is also possible by pressing
BASS +/–.)
When you play a disc (or software) encoded with Dolby Digital or
DTS Digital Surround, the following symptoms may occur;
Sound does not come out at the beginning of playback.
Noise comes out while searching for or skipping chapters or
tracks.
In these cases, change the decode mode to “DOLBY D” (for Dolby
Digital) or “DTS” (for DTS Digital Surround).
7 When DVD or AUX DIGITAL is selected as the source
On the remote control:
Press DECODE to select the decode mode.
The current decode mode appears on the display window.
Example:When “AUTO/PCM” is selected.
Each time you press the button, the decode mode changes as
follows;
] AUTO/PCM ] DOLBY D ] DTS ] (back to the
beginning)
AUTO/PCM: Normally select this. The system automatically
detects the incoming signals.
DOLBY D: Select this if the symptoms above occur when
playing a disc (or software) encoded with Dolby
Digital.
DTS: Select this if the symptoms above occur when
playing a disc (or software) encoded with DTS
Digital Surround.
NOTE
When “DOLBY D” or “DTS” is selected, if a signal encoded with
another digital format comes in, you cannot listen to the sound. (The
GDIGITAL or C indicator flashes.)
Changing the source returns the decode mode to “AUTO/PCM”
automatically.
Adjusting the output level
of the subwoofer
Adjusting the bass/treble
sound
Changing the decode
mode
TH-A85-55[B]-05Basic.fm Page 22 Thursday, April 10, 2003 4:00 PM