Filter
Top Products
36
Playing back DVDs/CDs
7 When a disc is played back
1 Slide the remote control
mode selector to DVD.
2 Press ON SCREEN twice.
• “ON SCREEN” will appear in the display
window on the DVD player. The status bar
and the menu bar will appear on the TV
screen.
Example:
When a DVD VIDEO is loaded
3 Press 2/3 (cursor) to select an
item to be operated.
4 Press ENTER.
• The selected function can be set. For the
setting content, refer to “Function list”.
(A page 37)
• The currently active function is shown in
blue.
• To turn off the menu bar, press ON
SCREEN.
Information displayed on the status bar
DVD VIDEO/DVD AUDIO/DVD VR (the example
below is for a DVD VIDEO)
VCD/SVCD/CD/ASF/DivX/MPEG1/MPEG2 disc
(the example below is for a CD)
NOTE
• The playback status has the same meaning of the
mark on the on-screen guide (
A
page 25).
Using the status bar and
the menu bar
Status bar
Menu bar
(DVD VIDEO)
Current title number
(DVD AUDIO)
Current group number
(DVD VR)
Current original
program number (PG)/
current play list
number (PL)
Time
Playback
status
(DVD VIDEO/DVD VR)
Current chapter number
(DVD AUDIO)
Current track number
Sound
signal type
0:25:58
Playback mode status
(VCD/SVCD/CD)
Current track number
(ASF/DivX/MPEG1/MPEG2 disc)
Repeat mode status
Time Playback
status
For the locations of the remote
control buttons, refer to page 28.
EXA10[J_C_UJ]-05.fm Page 36 Tuesday, September 6, 2005 6:07 PM