JVC XL-MV7000GD CD Player User Manual


 
Page 23
English
RESTRICTING USE OF YOUR DISCS
Locking a disc
The Read-Protect function restricts viewing of a disc. Only people who
know the code can unlock the disc. You can lock only Video CDs and
SVCDs (up to ten discs).
Notes
You cannot lock a disc while it is playing.
All Read-Protect operations are performed using buttons on the
player, not on the remote control.
Operation
1. Play the disc for a moment, then press the 7 (STOP) button.
Locking a disc with the
Read-Protect function
Canceling Read-Protect
Operation
1. Place the disc in a tray, then press the CD button (1 - 3) for that
tray. PROTECT is displayed on the television screen.
2. Hold down the 4 PREV (Previous) button on the player for
more than three seconds. The indication “Loc” in the display
window will flicker for a moment.
Releasing the Read-Protect temporarily
Operation
1. As above, hold down the 4 PREV (Previous) button on the
player for at least three seconds. The indication “Loc” in the
display window will flicker for a moment.
2. Press the number key “7” four times. You can now play the
disc temporarily until you press the 0 (OPEN/CLOSE) button
for that disc, or until you play another disc. Turning off the
player does not restore the Read Protect function.
2. Hold down the NEXT button on the player for at least three
seconds. The track and time numbers are no longer displayed.
3. Press the number key “8” four times. The display window
indicates “Loc.”
Now the disc cannot be viewed. You can open and close the tray and
you can turn the player power on and off, but no other functions are
available for this locked disc.
Note
PROTECT is displayed on the television screen.
Cut out the following instructions and keep them separately, to
ensure privacy.
3. Press the number key “8” four times. You can now play the
disc.
CD
3
CD
2
CD
1
PREV
1
2
3
4
5
6
7
8
9
10
+10
PREV
NEXT
EN.01-27.XL-MV7000GD[U,US] 99.11.15, 3:49 PM23