Filter
Top Products
11
English
ONE DISC MODE PLAYBACK
Playing the tracks in random
order
To play every track of the disc, which has been selected in Step 2,
press the RANDOM button following Step 2, to show “RANDOM”
on the display. Then press the PLAY/PAUSE button or
button
on the remote control. The playback will be stopped when all tracks
have been played.
Press the RANDOM button again to cancel the function, clearing
the indication from the display during stop.
Playing the disc repeatedly
To repeatedly play the entire disc selected in Step 2 above, press
the REPEAT button, and select and show “REPEAT” on the display.
Then start the disc to play it repeatedly until stopped.
This function can be used in the basic ONE DISC mode as well as
when the RANDOM function is effective.
Press the REPEAT button twice to cancel the function, clearing the
indication from the display.
Playing a track repeatedly
To repeatedly play the track selected in Step 3 above, press the
REPEAT button, and select to show “REPEAT 1” on the display.
Then start playing the disc to play the selected track repeatedly
until stopped.
This function can be used in the basic ONE DISC mode as well as
when the RANDOM function is effective.
Press the REPEAT button once to cancel the function, clearing the
indication from the display.
Playing only the beginning of
each disc's first track
To scan the tracks of the selected disc, press the INTRO button to
show “INTRO” on the display and the
button. The beginning
part of each track will be played for 15 seconds, The playback will
be stopped when the scan is completed.
Press the INTRO button again to cancel the function, clearing the
indication from the display.
PLAY MODE
ONE DISC
or
(Remote control)
2. Select a disc you want to play.
Press the DISC button and then use the DISC/TRACK jog dial.
The –1 DISC or +1DISC buttons as well as the numeric buttons
on the remote control can also be used.
One disc can be selected and played entirely in the ONE DISC
mode. The starting track may be specified.
Every track of the disc can be played once in a random order
(RANDOM function).
The entire disc can be played repeatedly (REPEAT function) or
one selected track can be played repeatedly (REPEAT-1 function)
in the basic mode as well as when the RANDOM function is
selected.
The beginning part of every track of the disc can be played for 15
seconds (INTRO function).
Basic mode
1. Select the mode.
Use the PLAY MODE button, or press the ONE DISC button
on the remote control, to show “ONE DISC” on the display.
3. Select the track if you want to start playing the disc from a
specific track.
Press the TRACK button and then use the DISC/TRACK jog
dial. The
or buttons as well as the nemeric buttons on
the remote control can also be used.
DISC
TRACK
4. Press the PLAY/PAUSE button or the button on the remote
control to start the disc, playing it from the first track or from
the specified track through the last track.
NOTE: If you press the TRACK button after a disc is speci-
fied, playback starts automatically, however in order
to play the specified track, you should press the
button.
5. Tracks can be skipped forward or backward during the playback
using the
or button. The playback can be paused or
stopped in the normal manner. For further information, see
[BASIC OPERATION] on pages 7 and 8.
10