Filter
Top Products
9
English
• Interrupting the playback
Press the PLAY/PAUSE button or the button on the remote
control to temporarily interrupt the playing, which can be resumed
by pressing the PLAY/PAUSE button or the
button on the remote
control.
Playing discs
1 Selecting a playback mode
There are three main playback modes, namely CONTINUE, ONE
DISC, and PROGRAM; each has selective playback functions. (See
the following pages for the description of the playback modes and
functions.)
Select the mode using the PLAY MODE button on the control panel,
or the CONTINUE, ONE DISC, or PROGRAM button on the
remote controller.
PLAY MODE
2 Selecting a disc to play
To select a disc for playing, press the DISC button and then use the
DISC/TRACK jog dial, or use the – 1 DISC or + 1 DISC buttons or
numeric buttons on the remote control, showing the DISC (slot)
number on the display.
NOTE: When you use the numeric buttons to specify the disc
or track numbers, press the button in the order of larger
digit. For example, press “5,” then “2” for “52.” Press
“1,” “4,” and then “8” for “148.”
3 Selecting a track
To select a track of the selected disc, from which the disc is to be
played instead of starting from the beginning, press the TRACK
button and then use the DISC/TRACK jog dial,
or buttons
or use the numeric buttons on the remote control, showing the
required TRACK number on the display.
TRACK
or
TRACK
(Remote control)
4 Starting the disc
Press the PLAY/PAUSE button or the button to play the selected
disc or track.
(Remote control)
or
PLAY/PAUSE
NOTE: • If the disc storage door is open when playback starts,
the door closes automatically.
• After specifying the disc to be played and pressing
the TRACK button, playback will begin automatically.
• Once disc playback is started, in order to specify a
track number to be played, the PLAY/PAUSE button
or the
button on the remote control must be
pressed within five seconds.
(Remote control)
or
PLAY/PAUSE
• Skipping to the different track in the same disc
during playback
Proceed to steps 3 and 4. Press or buttons to skip tracks
respectively.
• Skipping to the begining of the different disc
during playback
Proceed to steps 2, then press PLAY/PAUSE button on the front
panel or the
button on the remote control.
• Skipping to a track in the different disc during
playback
Proceed to steps 2 to 4.
NOTE: When “JOG” is shown in the display, the
button acts
as the ENTER function and the pause function is dis-
abled.
• Changing discs during playback
The carousel slots positioned in the front behind the disc storage
door are accessible for loading, unloading, or changing discs while
a disc is being played. Press the EXCHANGE button to open the
door. Press the EXCHANGE or OPEN/CLOSE button to close the
door.
CAUTION
• Insert or remove discs very carefully at this time — the
slots other than the center one are radially slanted to-
ward the center of the carousel. Never try to rotate the
carousel forcibly — it cannot be rotated when a disc is
being played.
• Do not insert a disc outside of the loading area.
•A disc placed outside of the loading area is not regis-
tered and playback will not start.
•When you want to rotate the carousel, press the OPEN/
CLOSE button after closing the disc storage door.
• After loading/unloading discs, promptly close the disc
storage door. Playback will not occur with the door is in
the open position.
Stopping the playback
Press the button to stop and cancel the playing.
NOTE: When “JOG” is shown in the display, the
button acts
as the CLEAR button and the stop function is disabled.
(Remote control)
or
EXCHANGE
EXCHANGE
or
STOP/CLEAR
(Remote control)
8
DISC
DISC
or
(Remote control)