JVC W-XC406 CD Player User Manual


 
28
ENGLISH
Symptoms Remedies/Causes
MP3/WMA playback
• Tracks do not play back in the order
you have intended them to play.
Playback order is determined when the files are
recorded.
• Elapsed playing time is not correct. This sometimes occurs during play. This is caused
by how the tracks are recorded on the disc.
• “NO FILES” appears on the display. Insert a disc that contains MP3/WMA tracks.
• Correct characters are not displayed
(e.g. album name).
This unit can only display alphabets (upper/lower
case), numbers, and a limited number of symbols.
Tape playback
• A cassette cannot be inserted. Insert the cassette with the exposed tape facing
right.
• Cassette can be neither played back nor
ejected.
Unlock the cassette (see page 17).
• “NO TAPE” appears on the display. Insert a cassette correctly.
• Cassette tapes become hot. This is not a malfunction.
• Tape sound is at very low level and
sound quality is degraded.
Clean the tape head using a head cleaning tape.
CD changer
• “NO DISC” appears on the display.
Insert a disc into the magazine.
• “NO MAG” appears on the display. Insert the magazine.
• “RESET 8” appears on the display. Connect this unit and the CD changer correctly
and press the reset button of the CD changer.
• “RESET 1” – “RESET 7” appears on
the display.
Press the reset button of the CD changer.
• The CD changer does not work at all. Reset the unit (see page 2).
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
EN24-29–KW-XC406_405[U]f.indd 28EN24-29–KW-XC406_405[U]f.indd 28 7/26/05 9:28:36 AM7/26/05 9:28:36 AM