Filter
Top Products
21
■■
Using External Equipment
REMOTE CONTROL RM-RXUV9MD
DIMMER SLEEP
DISPLAY FM MODETAPE
/
AUX
AHB PRO
AUTO
PRESET
CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
EDIT
/
TITLE
CHARA
UP
SET
DOWN
TUNER
BAND
MD
VOLUME
CD
MD TUNER CD
CD
OPEN
/
CLOSE
MD
EJECT
PHONES
TAPE
/
AUX
BAND
STANDBY
/
ON
DOWN UPMULTI CONTROL
TAPE/AUX
TAPE/AUX
You can listen to external equipment.
■
First make sure that the external equipment is properly connect-
ed to the System. (See pages 4-5.)
■
1. Set the VOLUME control to the minimum
position.
■
2. Press the TAPE/AUX button.
Each time you press the button, the display changes between
AUX1 and AUX2.
When the “AUX 1 (ANALOG IN)” is selected:
You can use the external equipment connected to the LINE IN
(AUX1) terminals of the System, such as cassette deck, turnta-
ble, etc.
• To listen to the external equipment, start playing the exter-
nal equipment.
When the “AUX 2 (DIGITAL IN)” is selected:
You can use the external equipment connected to the OPTICAL
DIGITAL IN (AUX2) terminal of the System, such as CD play-
er, etc.
• To listen to the external equipment, start playing the exter-
nal equipment.
■
3. Start playing the external equipment.
■
4. Adjust the VOLUME control to the desired
listening level.
■
5. Apply sound effects, if you wish.
■
Press the AHB PRO button to reinforce the bass sound.
■
Press the BASS/TREBLE button on the Remote Control to con-
trol the tone. (See “Tone Control” on page 7.)
To exit TAPE/AUX mode, you will automatically switch out of
TAPE/AUX mode when you select another source.
Note:
For operation of the external equipment, refer to its Instruc-
tions.
You can record the System’s source to external equipment which is
connected to the LINE OUT terminals of the System, such as cas-
sette deck, etc.
■
First make sure that the external equipment is properly connect-
ed to the System. (See page 4).
■
1. Play the System’s CD Player, MD Player, or
tune into a station.
■
The recording level is not affected by the VOLUME level set by
the System. Also it is not affected by the sound effects.
Note:
For operation of the external equipment, refer to its Instruc-
tions.
Listening to External
Equipment
To record an external music source to an MD, see “Recording
onto an MD” on page 14.
(Stays lit.)
(Stays lit.)
Recording the System’s
source to External Equipment
UX-V9MD(A)-eng.fm Page 21 Tuesday, June 15, 1999 2:35 PM