Filter
Top Products
8
■■
Using the Tuner
VOLUME
CLOCK
TIMER/
SNOOZE
MD REC
AHB PRO
PRESET
TUNING
SLEEP
REMOTE CONTROL RM-RXUV9MD
DIMMER SLEEP
DISPLAY FM MODETAPE
/
AUX
AHB PRO
AUTO
PRESET
CD
PROGRAM RANDOM REPEAT
BASS TREBLE CANCEL
EDIT
/
TITLE
CHARA
UP
SET
DOWN
TUNER
BAND
MD
VOLUME
CD
MD TUNER CD
CD
OPEN
/
CLOSE
MD
EJECT
TAPE
/
AUX
BAND
DOWN UPMULTI CONTROL
PHONES
STANDBY/ON
<
FM MODE
DOWN
¢
4
AUTO PRESET
UP
>
SET
TUNER BAND
Band display, Frequency display,
Preset channel
FM mode indicators
TUNER BAND
4
¢
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
PRESET
TUNING
You can listen to FM and AM (MW/LW) stations. Stations can be
tuned in manually, automatically, or from preset memory storage.
■ Before listening to the radio:
• Make sure that both the FM and AM (MW/LW) antennas
are correctly connected. (See page 3).
One Touch Radio —————————
Just press the TUNER BAND button to turn on the System and start
playing the station you were last tuned to.
■ You can switch from any other sound source to the radio by
pressing the TUNER BAND button.
■
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the pre-
set number appears first.)
Each time you press the button, the band alternates between FM
and AM (MW/LW).
■
2. Select a station using one of the following
methods.
■ Manual Tuning
Press the
4 or ¢ button on the Unit or the Remote Control
repeatedly to move from frequency to frequency until you find
the station you want.
OR
■ Auto Tuning
If you press and hold the 4 or ¢ button on the Unit or the
Remote Control for one second or more, the frequency changes
down, or up, automatically until a station is found.
OR
■ Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the desired preset number using the UP, DOWN, > and <
button on the Remote Control. After 1 second the display will
show the preset number’s band and frequency
.
Example: Press the UP button until the preset number 12 “P12”
appears.
■ Preset Tuning using the Unit (Possible only after pre-
setting stations)
Press the PRESET TUNING button to select the desired preset
number. Its band and frequency are displayed.
You can preset up to 30 FM stations and up to 15 AM (MW/LW)
stations using the Remote Control.
Note: Preset numbers may have been set to factory test frequen-
cies prior to shipment. This is not a malfunction. You can
preset the stations you want into memory by following one
of the presetting methods below.
Manual Presetting —————————
■
1. Select a band by pressing the TUNER
BAND button.
■
2. Press the 4 or ¢ button to tune in a sta-
tion.
■
3. Press the SET button.
“SET” will blink for 5 seconds.
Within 5 seconds, proceed to the next step.
When the display returns to the one set in STEP 2 after 5 sec-
onds, press the SET button again.
Tuning In a Station
TUNER
BAND
FMAM
FMAM
TUNER
BAND
(on the Remote Control) (on the Unit)
Presetting Stations
DOWN
UP
(After 1 second)
or
SET
DOWN
UP
SET STORED
TUNER
BAND
SET
(Within 5 seconds)
or
FM = 30, AM = 15
When changing the Band
UX-V9MD(A)-eng.fm Page 8 Tuesday, June 15, 1999 2:35 PM