Filter
Top Products
– 8 –
English
Speaker grille
To remove the speaker grille, inserting your fingers at the
top of the speaker grille, pull towards you. Then pull the
bottom towards you.
To attach the speaker grille, put the projections of the
speaker grille into the holes of the speaker.
Holes Projections
To remove the speaker grilles (ONLY FOR UX-P5)
The speaker grilles are removed as the illustrations below.
IN
RL
OUT
AUX
To audio output
Audio equipment
To audio input
For UX-P5
By using audio cords (not supplied), connect:
• Between the audio input jacks on the other equipment
and AUX OUT jacks: For recording on the other
equipment.
• Between the audio output jacks on the other equipment
and AUX IN jacks: For playing the other equipment.
RL
AUX
To audio output
Audio equipment
For UX-P3
For playing the other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX jacks by using audio cords (not
supplied).
Continued
Connecting Other Equipment
For UX-P5: You can connect both of the analog and
digital equipment.
For UX-P3: You can connect audio equipment — used
only as a playback device.
• DO NOT connect any equipment while the power
is on.
• DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
Be sure that the plugs of the audio cords are colored: White
plugs and jacks are for left audio signals, and red ones for
right audio signals.
EN01-13.UX-P5&3[[UW,UY] 01.2.26, 11:01 AM8