JVC UX-G50 Stereo System User Manual


 
22
2 Make the timer setting as you want.
1
Set the hour then the minute for on-time.
2
Set the hour then the minute for off-time in the
same manner.
3
Select the playback source—“TUNER FM,”
“TUNER AM,” “DISC,” or “AUX.”
When selecting tuner: Select a preset number or
“P – – –” by pressing PRESET UP or PRESET
DOWN, then press SET.
When selecting CD:
Select a disc by pressing
PRESET UP or PRESET DOWN, then press SET.
4
Set the volume.
If you select “VOL – –,” the volume is set to the level
that was set before the power was turned off.
3 Turn off the System (on standby) if you have set the
timer with the System turned on.
To turn off the Timer after its setting is done
Since Daily Timer is activated at the same time everyday,
you may need to cancel it on some particular days.
1 Select the Timer you want to cancel.
2 Turn off the selected Timer.
The number indicator corresponding to the Daily Timer
is turned off.
To turn on the Timer again,
repeat the above steps and
press in step 2...
The number indicator corresponding to the Daily Timer
lights.
PRESET UP
PRESET DOWN
SET/RESUME
PRESET UP
PRESET DOWN
SET/RESUME
PRESET UP
PRESET DOWN
SET/RESUME
STANDBY/ON
CLOCK
/TIMER
Canceled
Clock setting
(see page 16)
Daily 1 Timer
Daily 2 Timer Daily 3 Timer
CANCEL
SET/RESUME
UX-G50[J].BOOK Page 22 Thursday, February 9, 2006 4:11 PM