Filter
Top Products
12
Resume Play for Audio CD/MP3
If you press 7 during playback, the position of the track
where you stopped playback will be memorized by the
unit.
By pressing CD 6, you can start playback again
from the point where you stoppped it.
To activate/cancel resume play
When the source is a CD...
memo
• Changing the disc by pressing the disc selection
buttons will erase the track number for resume play.
• To play back from the first track while resume play is
activated, press 7 twice during playback then press
CD 6.
Remote
ONLY
SET/RESUME
RESUME ON
RESUME OFF
2 sec.
For MP3 playback
According to the MP3 playback mode, 4/1 /
¡/¢ or number buttons work for the group
selection or the track selection.
Examples:
When the MP3 play back mode is “GROUP.”
You can change the MP3 playback mode
by pressing MP3 MODE.
• Each time you press the button, the MP3
playback mode changes as follows:
TRACK:
4/1, ¡/¢, and number
buttons work for the track selection of
the MP3 discs.
GROUP:
4/1, ¡/¢, and number
buttons work for the group selection
of the MP3 discs.
Number buttons works for selecting
the track number within the group.
Total group number Total track number
GR (Group) indicator
MP3 MODE
TRACK GROUP
1
1
2
3
10
11
12
4
5
6
7
8
9
01
01
02
03 04
05
Hierarchy
ROOT
Level 1 Level 2 Level 3 Level 4 Level 5
MP3 groups/tracks configuration
This System plays back MP3 tracks as follows.
Group with its play order
MP3 track with its play order
UX-G50[J].BOOK Page 12 Thursday, February 9, 2006 4:11 PM