Filter
Top Products
Basic operations
18
On the remote control:
Press one of the source selecting buttons
(DVD, FM/AM, VCR or DBS).
DVD
: To play back a disc (DVD, Video CD etc.). (
A
pg. 21, 23)
FM/AM
: To tune in an FM or AM station. (
A
pg. 25)
Each time you press the button, the band alternates
between FM and AM.
VCR
: To select the source from a component connected to the
VCR IN jacks and AUDIO IN (VCR) jacks. (
A
pg. 12)
DBS
: To select the source from a component connected to the
DIGITAL IN (DBS) jack. (
A
pg. 12)
On the center unit:
Press SOURCE repeatedly until the source
name you want appears on the display
window.
Each time you press the button, the source changes as follows;
]
DVD
]
AM
]
FM
]
VCR
]
DBS
]
(back to the
beginning)
The selected source name appears on the display window.
Example: When “VCR” is selected.
NOTE
• When a source except DVD is selected, this system does not output
video signals.
CAUTION
• Always set the volume to minimum level before starting any source.
If the volume is set at its high level, the sudden blast of sound could
permanently damage your hearing and/or blow out the speakers.
You can adjust the volume level within the range from “0”
(minimum) to “70” (maximum).
On the remote control:
Press AUDIO VOL + or –.
• Press
+
to increase volume.
• Press
–
to decrease volume.
On the center unit:
Turn VOLUME.
•Turn
VOLUME
clockwise to increase volume.
•Turn
VOLUME
counterclockwise to decrease volume.
The volume level appears on the display window.
On the remote control:
Press MUTING.
“MUTING” appears on the display window and the sound turns off.
To restore the sound
Press
MUTING
again.
• Pressing
AUDIO VOL +/–
(or turning
VOLUME
on the center
unit) also restores the sound.
You can dim the indications on the display window, the
illumination lamp level on the center unit.
On the remote control:
Press DIMMER.
Each time you press the button, the brightness level changes as
follows;
]
OFF
]
DIMMER1
]
DIMMER2
]
(back to the
beginning)
• OFF: Returns to the normal level.
• DIMMER1: Dims the display window, the illumination lamp.
• DIMMER2: Dims the display window more than DIMMER1 and
turns off the illumination lamp.
Selecting the source to
play
Adjusting the volume
Turning off the sound
temporarily
Adjusting the brightness
TH-M42[J].book Page 18 Wednesday, April 23, 2003 5:58 PM