JVC SP-UXG70 Speaker System User Manual


 
3
Connections
Connect AV directly to the video input of your TV.
Connecting AV to a TV via a VCR may interfere with your
viewing when playing back a copy-protected disc.
Connecting AV to an integrated TV/VCR system may also
interfere with your viewing.
Do not connect the AC power cord until all other
connections have been made.
Supplied accessories
Check to be sure that you have all the following items.
FM antenna (x1)
AM loop antenna (x1)
Core filters* (x2)
Remote control (x1)
Batteries (x2)
If any item is missing, consult your dealer immediately.
Front panel: Pull down the cover until you hear a clicking sound.
From the portable audio device:
See page 5.
From the PC:
See page 11.
From the headphones:
See page 7.
¤ To a wall outlet
Plug in the AC power cord only after all
connections are complete.
From the digital input of digital audio
component
See page 5.
~ From the powered subwoofer
See page 4.
! From the input of TV/monitor
See page 4.
Ÿ From AM/FM antenna
See page 4.
@ From the speakers
See page 5.
*Attaching the core filter to the USB cable, LINE IN and LINE OUT cable to reduce interference
Wind firmly the USB cable twice.
Wind firmly the LINE IN and LINE OUT
cable once.
Keep close between the plug and the core
filter.
Do not damage the cable by applying
excessive force when winding.
Close the core filter until
you hear a clicking sound.
Stopper
At the front panel
Rear panel
UX-G70[B].book Page3 Monday, April 17, 2006 1:41 PM