Filter
Top Products
36
Playing Back from the PC:
• Check if your PC equipped with the CD-ROM drive is
running on Windows
R
98*, Windows
R
98SE*, Windows
R
Me*, Windows
R
2000*, or Windows
R
XP* and prepare its
CD-ROM.
*Microsoft
R
, Windows
R
98, Windows
R
98SE, Windows
R
Me, Windows
R
2000 and Windows
R
XP are registered
trademarks of Microsoft corporation.
• DO NOT turn off the System or disconnect the USB cable
while installing the drivers or until your PC has recognized
the System.
• Use a full speed USB cable (version 1.1).
• If your PC does not recognize the System, disconnect the
USB cable and connect it again. If this does not work,
restart Windows.
• The drivers installed can be recognized only when the USB
cable is connected between the System and your PC.
• The sound may not be played back correctly—interrupted
or degraded—due to your PC settings or PC specifications.
Daily Operations—Sound & Other Adjustments
(see pages 12 to 15)
Adjusting the Sound:
• This function also affects the sound through the
headphones.
Changing the Scanning Mode:
• You cannot change the scanning mode to progressive in the
following cases:
– When your TV does not support the progressive video
input.
– When you have not connected your TV to the system
using a component video cord.
Setting the Clock:
• “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Advanced Radio Operations
(see pages 16 and 17)
• If you want to know more about Radio Data System, visit
«http://www.rds.org.uk».
• If the System takes time to show the Radio Data System
information—PS, PTY, RT signals, “WAIT PS,” “WAIT
PTY,” or “WAIT RT” will appear while searching.
Unique DVD/VCD Operations
(see pages 18 to 20)
Selecting the Audio Track:
• On some DVD Video discs, you cannot change audio
languages while playing back.
Special Effect Playback:
• During slow-motion playback, no sound will be
reproduced.
• While zoomed in, the picture may look coarse.
Advanced Disc Operations
(see pages 21 to 29)
Programming the Playing Order—Program Play:
• While programming steps...
– You cannot eject any discs from the disc trays.
– Your entry will be ignored if you have tried to program
an item number that does not exist (for example,
selecting track 14 on a disc that only has 12 tracks).
Playing Repeatedly:
• When DVD Video or DVD Audio is loaded in this System,
playback of the disc next to the DVD Video or DVD Audio
will not start, although /REPEAT ALL on the TV
screen or ALL in the display window is shown.
• A-B Repeat can be used within the same title while playing
a DVD Video, and within the same track for the other discs.
On-screen Disc Operations:
• For DVD-R/-RW in the VR format, “PG” or “PL” appears
instead of “TITLE” on the on-screen bar.
Operations on the Control Screen:
• If you press ON SCREEN on the remote control during
playback, playback information appears on the TV screen.
ALL
UX-G70[B].book Page36 Monday, April 17, 2006 1:41 PM