Filter
Top Products
Filename [TH-R1R3EU_07Timer Recording.fm]
Masterpage:Left0
Page 49Monday, 28 March 2005 21:23
49
TIMER RECORDING
You can programme this unit to timer record as many as 8
programmes.
With the S
HOWVIEW system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
HOWVIEW number.
1 Load a recordable disc.
● For details, refer to APlacing A DiscB (A pg. 5).
2 Press SHOWVIEW to
display the S
HOWVIEW
screen.
3 Press the number keys
to enter the
ASHOWVIEW NO.B of a
programme you wish to
record, then press
ENTER.
● If you have made a
mistake, press
CANCEL and input the correct number before you press
ENTER.
● To clear all entered numbers at a time, press CLEAR(o).
● If the number you entered is invalid, ASHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRYB appears on the TV
screen. Input a valid ASHOWVIEW NO.B.
● If AGUIDE PROGRAMME IS NOT SET SELECT CHANNEL
YOU WANT TO RECORDB appears on the TV screen, set
Guide Programme number manually.
● When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMEB appears on the TV screen, you need to cancel
some of the reserved programmes.
4 The ASHOWVIEW NO.B you entered and the matching timer
recording information are displayed on the TV screen. Check
the programme data. To cancel this setting, press RETURN.
5 Press selection keys to
select desired recording
option as required.
6 Press selection keys to
select the desired
setting, then press
ENTER.
● ADaily/Weekly
Recording FunctionB
(A pg. 49)
● AVPS/PDC RecordingB
(A pg. 50)
● ARecording ModeB (A pg. 39)
● AModify Title NameB (A pg. 58)
7 Press ENTER to access the Programme Confirmation screen.
8 Press ENTER to complete the timer programming.
● To programme another timer, repeat steps 2 - 8.
● If APROGRAMME OVERLAPPEDB appears on the TV screen,
see AWhen Programmes Overlap Each OtherB (A pg. 53).
9 Press TIMERj to engage the unit’s timer mode.
● The unit turns off automatically and j appears on the front
display panel.
● To disengage the timer mode, press TIMERj again.
● There may be cases that the SHOWVIEW Timer Programming
function prolongs the stop time of the programming.
● When two successive programmes are recorded with the
S
HOWVIEW Timer Programming function, the ending of the first
programme or the beginning of the second programme may not
be recorded.
● If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
● TV DIRECT mode is activated when the unit turns on
automatically during S
HOWVIEW Timer Programming.
Daily/Weekly Recording Function
You can record programmes with one of the following weekly/daily
timer settings.
SHOWVIEW Timer Programming
● Turn on the unit.
● Turn on the TV and select an input mode such as EXT1.
● Set the remote control selector switch to AUDIO.
● Press DVD on the remote control.
● Make sure that the unit’s built-in clock is set properly.
1 2 3
4 5 6
7 8 9
0
VOL
SAT
TV
AUDIO
CANCEL
SHOWVIEW/
VIDEO Plus+
0-9
DVD
CLEAR (o)
I
TIMER j
(FGDE)
ENTER
RETURN
Selection Keys
123
456
789
0
SP
1234
b
SHOWVIEW PRGM
DATE START STOP TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
THEN PRESS [ENTER]
OK
REC MODE
SHOWVIEW NO.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed. If not, see AS
HOWVIEW System SetupB (A pg. 78) and
set the Guide Programme number correctly.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong channel
number will be displayed on the S
HOWVIEW programme screen
in step 4. When this happens, set the correct Guide Programme
number for that station.
WEEKLY Select to record a weekly programme.
MON-FRI Select to record a daily programme from Monday
through Friday.
MON-SAT Select to record a daily programme from Monday
through Saturday.
SUN-SAT Select to record a daily programme from Sunday
through Saturday.
LP
b
120:3020:00
123407512
SHOWVIEW PRGM
DATE START STOP TV PROG
DAILY/WEEKLY
VPS/PDC
ON
NAME
REC MODE
SHOWVIEW NO.
05/07 SAT
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]
CONFIRM
SELECT
PROG
EXIT
TH-R1R3EU_00.book Page 49 Monday, March 28, 2005 9:23 PM