JVC SP-EXD1 Stereo System User Manual


 
37
Connect the other audio device to this system in
advance (page 10).
1 Press AUX.
The source changes to AUX.
2 Play the other audio device.
For details, refer to the manual of the device
connected.
3 Adjust the volume and the
sound quality of the system
(page 16).
Without setting the built-in clock, you cannot use
any timers.
To exit from the clock setting, press
CLOCK/TIMER as required.
To correct a misentry during the procedure
below, pressing CANCEL can return to the
previous step.
1 Press CLOCK/TIMER.
If you have already adjusted the clock
before, press the button repeatedly until the
clock time starts flashing.
2 Press cursor 2/3 to adjust the
hour, then press SET.
3 Press cursor 2/3 to adjust the
minute, then press SET.
Now the built-in clock starts to work.
Using the daily timer, you can wake up with your
favorite song.
You can store the three daily timer settings;
however, you can activate only one of the daily
timer.
To correct a misentry during the procedure
below, pressing CANCEL can return to the
previous step.
WIRELESS
Setting the built-in clock
Setting the daily timer
SVCDVD-A
Setting the various timer
Listening to the sound of
other audio device
EX-D5[C]-f.book Page 37 Monday, May 16, 2005 4:20 PM