Filter
Top Products
55
Manufacturer Codes
JVC 01, 02
Amstrad 03, 04, 05, 06, 31
BT 01
Canal Satellite 20
Canal+ 20
D-Box 24
Echostar 17, 18, 19, 21
Finlux 11
Force 28
Galaxis 27
Grundig 07, 08
Hirschmann 07, 17, 37
ITT Nokia 11
Jerrold 16
Kathrein 13, 14, 34
Luxor 11
Mascom 32
Maspro 13
Nokia 24, 26, 33
Pace 10, 25, 31
Panasonic 15
Philips 09, 23
RFT 12
Saba 35
Sagem 22, 29
Salora 11
Selector 29
Skymaster 12, 36
Thomson 35
TPS 22
Triax 30
Wisi 07
Initial setting: 01
Manufacturer Codes
JVC 01
Kenwood 02, 03
Mitsubishi 06
Panasonic 07
Philips 05
Pioneer 08
Sony 09
Toshiba 04
Yamaha 10
Initial setting: 01
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
❏ Changing the transmittable signals for operating
a STB
1
Press and hold STB .
2
Press STB CONT.
3
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for STB” below.
4
Release STB .
Now, you can perform the following operation on the STB.
STB : Turn on or off the STB.
After pressing STB CONT, you can perform the following
operations on the STB.
CHANNEL +/–: Change the channel numbers on the
STB.
1 – 9, 0, +10: Select the channel numbers on the
STB.
See the instructions supplied with the STB for details.
5
Try to operate your STB by pressing STB .
When your STB turns on or off, you have entered the correct
code.
If more than one code is listed for your brand of STB, try each
one until the correct one is entered.
❏ Changing the transmittable signals for operating
a DVD player
1
Set the mode selector to “DVD.”
2
Press and hold DVR/DVD .
3
Press DVR/DVD.
4
Enter the manufacturer’s code using buttons
1 – 9, and 0.
See “Manufacturers’ codes for DVD player” below.
5
Release DVR/DVD .
Now, you can perform the following operation on the DVD
player.
DVR/DVD : Turn on or off the DVD player.
3: Start playback.
4: Return to the beginning of the current
chapter (or fast-forward for some
models).
¢: Skip to the beginning of the next chapter
(or fast-reverse for some models).
7: Stop playback.
8: Pause playback.
DVD MENU: Display the menu recorded on DVD
VIDEO discs.
1 – 9, 0, +10: Select the chapter number.
After pressing DVR/DVD or DVD MENU, you can perform the
following operations on the DVD player.
5/∞/3/2: Select an item on the menu screen.
SET: Enter the selected item.
See the instructions supplied with the DVD player for details.
6
Try to operate your DVD player by pressing
DVR/DVD .
When your DVD player turns on or off, you have entered the
correct code.
Manufacturers’ codes for DVD player
Manufacturers’ codes for STB
NOTE
You cannot use this remote control to operate other
manufacturers’ DVD recorder.
If more than one code is listed for your brand of DVD player,
try each one until the correct one is entered.
51-55RX-D701S[B].p65 05.11.7, 2:54 PM55