Filter
Top Products
48
To change the transmittable signals for
operating another manufacturer’s DVD player
1. Press and hold AUDIO .
2 Press DVD.
For RX-8030VBK: “CALL” appears on the display window of
the remote control.
3. Enter a manufacturer’s code using buttons 1 – 9,
and 0.
See the list on page 49 to find the code.
4. Release AUDIO .
After pressing DVD or DVD MULTI, you can perform the
following operations on a DVD player:
3: Start playing.
4: Return to the beginning of the current (or previous)
chapter.
¢: Skip to the beginning of the next chapter.
7: Stop playing.
8: Pause playing. To resume, press 3.
After pressing DVD or DVD MULTI,
these buttons can be used for the DVD
menu operations.
Note:
For detailed menu operations, refer to the
instructions supplied with the discs or the
DVD player.
5. Try to operate your DVD player by pressing one
of the above buttons.
• DO NOT forget to turn on a DVD player before pressing one
of the above buttons.
If there are more than one code listed for your brand of
DVD, try each one until the correct one is entered.
23
456
8
MENU
ENTER
To change the transmittable signals for
operating another manufacturer’s VCR
1. Press and hold VCR 1 (for RX-8030VBK) or
VCR
(for RX-7030VBK/RX-7032VSL).
2. Press VCR 1 (for RX-8030VBK) or VCR (for RX-
7030VBK/RX-7032VSL).
For RX-8030VBK: “CALL” appears on the display window of
the remote control.
3. Enter manufacturer’s code using buttons 1 – 9,
and 0.
See the list on page 49 to find the code.
4. Release VCR 1 or VCR .
The following buttons can be used for operating a VCR:
VCR 1
: For RX-8030VBK—Turn on and off a VCR.
VCR : For RX-7030VBK/RX-7032VSL—Turn on
and off a VCR.
After pressing VCR 1 or VCR, you can perform the following
operations on a VCR:
CH +/–: Change the TV channels on a VCR.
1 – 10/0, 0, 100+ (+10):
Select the TV channels.
The 10/0 button will function as the ENTER
button if your VCR requires pressing ENTER
after selecting a channel number.
3: Start playback.
REW: Rewind a tape.
FF: Fast wind a tape.
7: Stop playing or recording.
8: Pause playing. To resume, press 3.
REC PAUSE: Enter recording pause by pressing this button.
To start recording again, press this button
then 3.
5. Try to operate your VCR by pressing VCR 1
or VCR .
When your VCR turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of
VCR, try each one until the correct one is entered.
42-52_8030&7030[J]10.pm6 03.2.13, 2:45 PM48