Filter
Top Products
39
English
Using the DVD MULTI Playback Mode
6. Press Control
55
55
5 /
∞∞
∞∞
∞ until “–REAR L+” appears on
the display.
7. Press Control
22
22
2 /
33
33
3 to adjust the left rear speaker
output level.
• Pressing Control 2 decreases the output level up to
–10 dB.
• Pressing Control 3 increases the output level up to
+10 dB.
8. Press Control
55
55
5 /
∞∞
∞∞
∞ until “–REAR R+” appears on
the display.
9. Press Control
22
22
2 /
33
33
3 to adjust the right rear speaker
output level.
• Pressing Control 2 decreases the output level up to
–10 dB.
• Pressing Control 3 increases the output level up to
+10 dB.
From the remote control:
1. Press DVD MULTI until “DVD MULTI” appears on
the display.
2. Select the analog discrete output mode on the DVD
player, and start playing a DVD.
Refer to the manual supplied with the DVD player.
If you want to make any adjustment, go to the following steps.
3. Press CENTER +/– to adjust the center speaker
output level.
• Pressing CENTER – decreases the output level up to –10 dB.
• Pressing CENTER + increases the output level up to +10 dB.
4. Press REAR (L) +/– to adjust the left rear speaker
output level.
• Pressing REAR (L) – decreases the output level up to –10 dB.
• Pressing REAR (L) + increases the output level up to +10 dB.
5. Press SOUND CONTROL, then press REAR•R +/–
to adjust the right rear speaker output level.
• Pressing REAR•R – decreases the output level up to –10 dB.
• Pressing REAR•R + increases the output level up to +10 dB.
DVD M
ULTI
CENTER
REAR
(L)
SOUND
CONTROL
100+
0
+10
– REAR•R +
RX-665VBK(C)24-50 98.5.12, 11:31 AM39