Filter
Top Products
14
English
Basic Operations
The following operations are commonly used when you play any sound source.
Turning the Power On and Off
On the front panel:
To turn on the power, press POWER.
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.
To turn off the power, press POWER again.
The STANDBY lamp lights up.
From the remote control:
To turn on the power, press AUDIO.
The STANDBY lamp goes off. The name of the current
source (or station frequency) appears on the display.
To turn off the power, press AUDIO again.
The STANDBY lamp lights up.
Selecting the Source to Play
On the front panel:
1. Press SOURCE so that the Control
55
55
5 /
∞∞
∞∞
∞ buttons
work for selecting the source.
The lamp above the button lights up.
2. Press Control
55
55
5 /
∞∞
∞∞
∞ until the source name you want
appears on the display.
From the remote control:
Press one of the source buttons directly.
TUNER/BAND* Listen to the radio.
Each time you press the button, the band
alternates between FM and AM.
CD* Listen to the CD player.
TAPE* Listen to the cassette deck.
TV SOUND Listen to TV sounds.
VCR View the playback picture from the VCR.
DVD Play back a stereo digital video disc.
PHONO* Listen to a record.
DVD MULTI Play back a digital video disc using the
analog discrete output mode (5.1 CH
reproduction) on the DVD player.
Current source name appears Current volume
level is shown here
CD
VCR
D
V
D
M
U
LT
I
TAPE
DVD
TUNER/
BAND
TV
SOUND
P
H
O
N
O
VOLUME
MUTE TUNED SLEEP SEA 3D-PHONIC
AUTO STEREO PRO LOGIC 3CH LOGIC HALL LOUDNESS
DAP
L
VOLUME
R
CH-
MHz
kHz
STANDBY
POWER
AUDIO
SOURCE
Notes:
• When you change the source
to an audio component
(TUNER/BAND, CD, TAPE, TV
SOUND or PHONO) while
watching pictures from a video
component (VCR, DVD or DVD
MULTI), pictures from the video
component remain on the TV
screen.
• When you press one of the
source buttons on the remote
control marked with an asterisk
(*), the receiver automatically
turns on.
• When connecting this receiver
and the DVD player by using
the AV COMPU LINK cable,
“DVD MULTI” is always
selected when you start playing
a disc of 5.1 ch surround. You
can change it to “DVD” after
playback starts.
RX-665VBK(C)1-23 98.5.12, 11:26 AM14