Filter
Top Products
32
Operating Other Manufacturers’ Video Equipment
By changing the transmission signals, you can use the remote
control supplied for this unit to operate other manufacturers’
equipment.
• Refer also to the manuals supplied for the other products.
• To operate these components with the remote control, first
you need to set the manufacturers’ code each for TV, CATV
converter, VCR and DVD player.
• When replacing the batteries in the remote control, set the
manufacturers’ codes again.
To change the transmission signals for
operating a TV
1
Set TV/CATV selector to “TV.”
2
Press and hold STANDBY/ON TV/CATV.
3
Press TV SOUND.
4
Enter manufacturer’s codes using buttons
1 – 9, and 0.
5
Release STANDBY/ON TV/CATV.
Now, you can perform the following operations on the TV.
STANDBY/ON TV/CATV
Turn on or off the TV.
TV/VIDEO Set the input mode (either TV or
VIDEO).
TV VOLUME +/– Adjust the volume.
TV/CATV CH +/– Change the channels.
After pressing TV SOUND, you can perform the following
operations on the TV:
1 – 9, 0, +10 (100+) Select the channels.
ENTER (10) Function as the ENTER button.
Note:
Refer also to the manual supplied with your TV.
6
Try to operate your TV by pressing
STANDBY/ON
TV/CATV.
When your TV turns on or off, you have entered the correct
codes.
If more than one code is listed for your brand of TV, try
each one until the correct one is entered.
Manufacturers’ codes for TV
Manufacturer Codes
JVC 01*
Hitachi 10
Magnavox 02
Mitsubishi 03
Panasonic 04, 11
RCA 05
Samsung 12
Sanyo 13
Sharp 06
Sony 07
Toshiba 08
Zenith 09
*
“01” is the initial setting.
To change the transmission signals for
operating a CATV converter
1
Set TV/CATV selector to “CATV.”
2
Press and hold STANDBY/ON TV/CATV.
3
Press TV SOUND.
4
Enter manufacturer’s codes using buttons
1 – 9, and 0.
5
Release STANDBY/ON TV/CATV.
Now, you can perform the following operations on the
CATV converter.
STANDBY/ON TV/CATV
Turn on or off the CATV converter.
TV/CATV CH +/– Change the channels.
After pressing TV SOUND, you can perform the following
operations on the CATV converter:
1 – 9, 0, +10 (100+) Select the channels.
ENTER (10) Function as the ENTER button.
Note:
Refer also to the manual supplied with your CATV converter.
6
Try to operate your CATV converter by
pressing STANDBY/ON
TV/CATV.
When your CATV converter turns on or off, you have
entered the correct codes.
If more than one code is listed for your brand of CATV
converter, try each one until the correct one is entered.
Manufacturers’ codes for CATV converter
Manufacturer Codes
Echostar 01*
General Instrument 02, 03, 04, 05,
06, 07, 08, 09
Hamlin 16, 17, 18, 19
Pioneer 14, 15
RCA 20
Scient 10, 11
Sony 21
Zenith 12, 13
*
“01” is the initial setting.
Manufacturers’ codes are subject to change
without notice. If they are changed, this remote
control cannot operate the equipment.
26-36_RX-5030VBK[UJ]f 03.5.16, 11:3132