Filter
Top Products
28
Automatic Selection of the TV Input Mode
• When you select “TV SOUND” as the source to play on the
receiver, the TV automatically changes the input mode to the
TV tuner so that you can watch TV.
• When you select “DVD” or “VCR” as the source to play on
the receiver, the TV automatically changes the input mode to
the appropriate position so that you can view the playback.
Automatic Power On/Off
The TV, VCR, and DVD player turn on and off along with the
receiver.
When you turn on the receiver;
• If the previously selected source is “VCR,” the TV and VCR
will turn on automatically.
• If the previously selected source is “TV SOUND,” only the TV
will turn on automatically.
• If the previously selected source is “DVD,” the TV and DVD
player will turn on automatically.
When you turn off the receiver, the TV, VCR, and DVD player
will turn off.
Note:
If you turn off the receiver while recording on the VCR, the VCR will
not turn off, but continue recording.
The AV COMPU LINK remote control system allows you to
use the five basic functions listed below.
Remote Control of the TV, DVD player, and VCR using this
Remote Control
See page 31 for details.
• Aim the remote control directly at the remote sensor on each
target component.
One-Touch Video Play
Simply by inserting a video cassette without its safety tab into
the VCR, you can start video playback without setting other
switches manually. The receiver automatically turns on and
changes the source to “VCR.”
The TV automatically turns on and changes the input mode to
the position so that you can view the playback.
When you insert a video cassette with its safety tab, press the
play (3) button on the VCR or on the remote control to get the
same result.
One-Touch DVD Play
Simply by starting playback on the DVD player, you can view
the DVD playback without setting other switches manually.
• When the DVD player is connected through the analog input
jacks on this receiver (and analog input is selected), the
receiver automatically turns on and changes the source to
“DVD.”
• When the DVD player is connected through the digital input
terminal on this receiver (and digital input is selected), the
receiver automatically turns on and changes the source to
“DVD DIGITAL.”
• The TV automatically turns on and changes the input mode
to the appropriate position so that you can view the
playback.
26-36_RX-5030VBK[UJ]f 03.5.15, 18:5928