Filter
Top Products
31
From the remote control:
1. Select and play the source encoded with Dolby Digital (bearing the mark
DIGITAL
) or with Dolby Surround (bearing the mark
DOLBY SURROUND
).
• When you play back the source encoded with Dolby Digital and select the digital
input for that source, the Ÿ DIGITAL indicator lights up on the display.
2. Press SURROUND MODE repeatedly until the mode — 3D
ACTION (or 3D DIGITAL), 3D DRAMA, or 3D THEATER
— you want appears on the display.
Each time you press the button, the DSP modes change as
follows (the 3D-PHONIC and DSP indicators also light up
on the display):
When the digital input is selected to play the source encoded with Dolby
Digital:
For other sources:
3. Press SOUND.
10 keys are activated for sound adjustments.
4. Press EFFECT to select the effect level.
Each time you press the button, the effect level changes as follows:
As the number increases, the selected 3D-PHONIC mode becomes
stronger.
To cancel the 3D-PHONIC mode
Press SURROUND MODE repeatedly until “OFF” appears.
The 3D-PHONIC and DSP indicators go off from the display.
HALL
DANCE CLUB
LIVE CLUB
THEATER
PRO LOGIC
3D ACTION
HEADPHONE
3D DRAMA
PAVILION
3D THEATER
OFF
DSP EFFECT 1 DSP EFFECT 2
DSP EFFECT 4
DSP EFFECT 3
DSP EFFECT 5
Using the DSP Modes
DOLBY DIGITAL
DIG-THEATER
HEADPHONE
3D DIGITAL
OFF
Note:
The 3D-PHONIC mode is not
used with the other DSP modes
such as the DAP mode and the
Surround mode. When the 3D-
PHONIC mode is turned on, the
other DSP mode, if used, will be
turned off.
Note:
Once you have adjusted the 3D-
PHONIC modes, it is memorized
for each 3D-PHONIC mode.
Notes on the indications:
• The indicator of the selected
DSP mode also lights up on
the display while selecting.
• The PRO LOGIC indicator
lights up when the Dolby Pro
Logic decoder built in this
receiver is activated.
• The Dolby Pro Logic decoder
is used not only for the analog
sources but also for the
sources encoded with Dolby
Digital in the following cases:
– When only front channel
signals are encoded.
– When front channel and
monaural rear channel
signals are encoded.
While the Dolby Pro Logic is
activated for this type of Dolby
Digital source, the
Ÿ
DIGITAL
indicator goes off.
MODE
SURROUND
SOUND
EFFECT
7
EN28_40.RX-1024V[J]/1.PM5 98.5.12, 0:26 PM31