JVC RV-DP200BK CD Player User Manual


 
26
LVT0703-002A / RV-DP200BK (B) / English
Troubleshooting
If you are having a problem with your System, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your
dealer, for service.
Symptom Possible Cause Action
No sound is heard. Connections are incorrect, or loose.
Headphones are connected.
Check all connections and make corrections.
(See page 3.)
Disconnect the headphones.
Unable to record. Cassette record protect tabs are removed. Cover the holes on the back edge of the cassette
with tape.
Poor FM reception The FM telescopic antenna is not properly
extended and positioned.
Fully extend the FM telescopic antenna and turn it
for the best reception.
The CD skips. The CD is dirty or scratched. Clean or replace the CD.
The CD does not play. The CD is upside down. Put the CD in with the label side up.
Unable to operate the Remote Control. The path between the Remote Control and the
sensor on the Unit is blocked.
The batteries have lost their charge.
Remove the obstruction.
Replace the batteries.
Operations are disabled. The built-in microprocessor has malfunctioned
due to external electrical interference.
Unplug the System then plug it back in after a few
minutes.
The cassette holder cannot be opened. During tape playing, the power cord was
unplugged.
Plug in the power cord and press the
%
button.
RD-DP200(B)-Eng.fm Page 26 Friday, February 2, 2001 1:27 PM