JVC RV-DP200BK CD Player User Manual


 
19
LVT0703-002A / RV-DP200BK (B) / English
Changing the Playing Rhythm
Pattern ———————————————
1. During playing the rhythm pattern, press
MODE button on the Unit to select your
favorite Rhythm mode.
2. Within five seconds, turn the Jog dial to
select your favorite rhythm pattern.
The selected rhythm pattern will be played.
Adjusting the Tempo During
Playback ——————————————
1. During playing the rhythm pattern, press
the TEMPO button on the Unit.
The current tempo appears on the display for five seconds.
2. Within five seconds, turn the Jog dial to
increase or decrease the tempo.
You can adjust the tempo between 60 and 160.
The tempo you have changed will be maintained even when
the System is turned off. However, it will be reset to the in-
itial value when you select other rhythm pattern.
You can generate two kinds of scratch sound (scratch-high and
scratch-low) by turning the Jog dial.
The scratch sound can be mixed with the following all sources to-
gether.
BIRDS, WAVES, or rhythm pattern generated from the
Rhythm Machine
Dram pad pattern generated from the Rhythm Machine
Music source except Tuner
MIC and Guitar inputs
1. Press the SCRATCH button on the Unit.
"SCRATCH" will appear on the display.
2. Turn the Jog dial to generate the scratch
sound.
When you turn the Jog dial clockwise or counterclockwise, the
scratch-high sound or scratch-low sound will be generated, re-
spectively. When you turn the Jog dial rapidly, the scratch
sound will be generated continuously.
To stop the scratch sound generation, press the
SCRATCH button once again to display "OFF".
Note: You cannot generate the scratch sound if Tuner is selected.
You can generate 20 pad patterns by pressing the Drum Pads A to
D on the Unit. Pad patterns are assigned to the Drum Pads A to D in
each Pad mode as shown in the "Pad Pattern Table".
The pad pattern can be mixed with the following all sources together.
BIRDS, WAVES, or rhythm pattern generated from the
Rhythm Machine
Scratch sound generated from the Rhythm Machine
Music source except Tuner
MIC and Guitar inputs
1. Press the PAD MODE button on the Unit to
select Pad mode.
Each time you press the button, mode changes as follows.
STD DR=PWR DR=TOM+HI=PERCUS=VOICE=
OFF=(back to the beginning)
2. Press the Drum Pads A to D on the Unit.
Each time you press the Pad, corresponding pad pattern which
is shown in the "Pad Pattern Table" will be generated.
Note: You cannot play the Pad pattern if Tuner is selected.
[Pad Pattern Table]
Abbreviations:
STD DR: Standard drum kit (bass, snare, high-hat, cymbal) PWR DR:Power drum kit TOM+HI:Tomtom and high-hat group
PERCUS:Percussion, ethnic percussion VOICE:Voice and onomatopoeic sounds
Generating Scratch Sound
M
O
D
E
(During playing the
rhythm pattern)
(Within 5 seconds)
(Playing rhythm
pattern changes.)
SCRATCH
Generating the Pad Pattern
PAD MODE
PAD MODE
Pad
STD DR
(Standard Drum)
PWR DR
(Tom + Hihat)
TOM+HI
(Tom & Hihat)
PERCUS
(Percussion)
VOICE
(Voice, etc.)
OFF
A Standard-Bass Drum Power-Bass Drum High Floor Tom High Agogo Sum
B Standard Snare Power Snare
Low Floor Tom
Low Agogo Yeh!
C Standard-Closed Hihat Power-Closed Hihat Open Hihat Open Hi Conga AY!
D Power-Crash Cymbal
Power-Crash Cym-
bal
Pedal Hihat Hand Clap Engine
RD-DP200(B)-Eng.fm Page 19 Friday, February 2, 2001 1:27 PM