Filter
Top Products
19
English
■
5. Setting the volume level.
1. Press the TIMER/SNOOZE button on the Unit.
The current volume setting blinks on the display.
2. Press the
¢ or 4 button to select the volume level.
-- : The current volume level will be used.
0 to 50: When the timer is turned on, the Volume will be
automatically set to the selected level.
■
6. Press the TIMER/SNOOZE button on the
Unit.
The timer setting is completed and the display returns to the dis-
play before you set the timer. The timer indicator remains lit.
■
7. Before turning off the System, prepare the
music source selected in step 4.
TUNER: Tune in to the desired station.
TUNER REC: Tune in to the desired station and insert a cassette
tape for recording the station.
CD: Insert a CD.
TAPE: Insert a tape.
■
8. Press the button to turn off the System.
To cancel the timer, press the TIMER/SNOOZE button. The
Timer indicator goes out on the display.
To re-activate the cancelled timer, press the TIMER/
SNOOZE button to light the Timer indicator. Then, press the TIM-
ER/SNOOZE button until the display returns to the original display.
The Timer indicator should remain lit.
To confirm the timer settings, cancel the timer once by press-
ing the TIMER/SNOOZE button. Then, press the TIMER/
SNOOZE button repeatedly, to see the current timer settings (ON
time, OFF time, source, and volume).
To change the timer setting, repeat the setting procedure from
the beginning.
• When the timer turns on, the Timer indicator starts blinking.
CAUTION: If the System is unplugged, or a power
failure occurs, the timer setting will be lost. You
will need to reset the clock first, then the timer.
5-Minute Snoozing —————————
When the timer turns on the music source you can, if you wish, ac-
tivate the 5-minute snoozing function to temporarily stop playback.
Press the TIMER/SNOOZE button on the Unit.
The “SNOOZE” indicator lights up on the display and the power is
turned off for five minutes for snoozing.
Use the Sleep Timer to turn the System off after a certain number of
minutes when it is playing. By setting the Sleep Timer, you can fall
asleep to music and know that your System will turn off by itself
rather than play all night.
■
You can only set the Sleep Timer when the System is on and a
source is playing.
■
1. Play a CD, a cassette tape, or tune in to the
desired station.
■
2. Press the SLEEP button on the Remote
Control.
The “SLEEP” indicator lights up.
■
When the clock is not set, the “CLOCK” indicator and the “AD-
JUST” indicator appear alternately on the display. Set the clock
at first.
■
3. Set the length of time you want the source
to play before shutting off.
• Each time you press the SLEEP button, it changes the number
of minutes shown on the display in this sequence:
10
= 20 = 30 = 60 = 90 = 120 = Cancelled = (back to
the beginning)
After setting the number of minutes for the Sleep Timer, the display
will stop blinking and return to the display as before setting the
Sleep Timer. (The display is dimmed.)
The System is now set to turn off after the number of minutes you
set.
To Confirm the Sleep Time
When the SLEEP button is pressed, the remaining sleep time is dis-
played. Wait until the display returns to the original display.
To Cancel the SLEEP Timer Setting
Press the SLEEP button until the “SLEEP” indicator goes out on the
display.
Turning off the System also cancels the SLEEP Timer.
■
If you are setting the Daily Timer, the System will be turned on
at the set time to wake you up.
Setting the SLEEP Timer