JVC MX-K7 Stereo System User Manual


 
5
Getting Started
EnglishEnglishEnglishEnglishEnglishEnglishEnglish
LVT0688-001A / MX-K7(J) / English
Connecting the AM Antenna
Rear Panel of the Unit
Even when connecting an outside AM antenna, keep the indoor AM loop connected.
CAUTION:
To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord.
Connecting the Speakers
CAUTIONS:
A TV may display irregular colors if located near the speakers. If this happens, set the speakers away
from the TV.
Use speakers with the correct impedance only. The correct impedance is indicated on the rear panel.
ANTENNA
AM
LOOP
FM
AM
EXT
FM
75
GND GND
LEFTRIGHT
IMPEDANCE 32 64 OHMS.
SURROUND SPEAKERS
LEFTRIGHT
IMPEDANCE 6 16 OHMS.
MAIN SPEAKERS
AM loop antenna (Supplied)
Turn the loop until you
have the best reception.
Attach the AM loop to its
base by snapping the
tabs on the loop into the
slot in the base.
AM antenna wire (not supplied)
If reception is poor, connect the outside antenna.
LEFTRIGHT
IMPEDANCE 32 64 OHMS.
SURROUND SPEAKERS
LEFTRIGHT
IMPEDANCE 6 16 OHMS.
MAIN SPEAKERS
Right side (rear view) Left side (rear view)
Black
Black
Red
Red
Main Speakers
Sorround Speakers (Rear Speakers)
Right side (rear view) Left side (rear view)
Black
Black
Black
Black
MX-K7(J).book Page 5 Thursday, April 12, 2001 10:30 AM