JVC MX-J333VU Speaker System User Manual


 
4
English
AM antenna
1 Connect the AM loop antenna to the AM LOOP
terminals as illustrated.
2 Turn the AM loop antenna until you have the best
reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire to the
AM EXT terminal and extend it horizontally. (The AM loop antenna
must remain connected.)
For better reception of both FM and AM
Make sure the antenna conductors do not touch any other
terminals and connecting cords.
Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
FM
(75 )
ANTENNA
AM LOOP
FM
AM EXT
231
Vinyl-covered wire
(not supplied)
AM loop antenna (supplied)
RIGHT LEFT
SPEAKERS
1
2, 3
Speaker cord
Speaker cord
Red
Black
Left
speaker
Right
speaker
1 Press and hold the clamp of the speaker terminal
on the rear of the unit.
2 Insert the end of the speaker cord into the terminal.
Match the polarity of the speaker terminals: Red (+)
to red (+) and black (–) to black (–).
3 Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the rear of
the unit.
Continued
Connecting Speakers
You can connect a pair of front speakers.
To connect front speakers
EN1-5;MX-J333V/PM6 6/30/99, 2:22 PM4