JVC MX-J333VU Speaker System User Manual


 
5
English
VOLTAGE
SELECTOR
110V
127V
220V
230V 
-240V
ANTENNA
AUX
AM EXT
FM
RIGHT
LEFT
FM
AM LOOP
(75 )
SPEAKERS
RIGHT
LEFT
VIDEO 
OUT
CAUTION:
SPEAKER IMPEDANCE
6 ~ 16
STEREO RECEIVER
MODEL NO. MX - J333V
UNIT NO. MX-J333V
AC 110/127/220 
/ 230 - 240V
50/6
0Hz 85W
VIDEO
OUT
VOLTAGE
SELECTOR
110V
127V
220V
230V 
-240V
ANTENNA
AUX
AM EXT
FM
RIGHT
LEFT
FM
AM LOOP
(75 )
SPEAKERS
RIGHT
LEFT
VIDEO 
OUT
CAUTION:
SPEAKER IMPEDANCE
6 ~ 16
AUX
RIGHT
LEFT
STEREO RECEIVER
MODEL NO. MX - J333V
UNIT NO. MX-J333V
AC 110/127/220
/ 230 - 240V
50/6
0Hz 85W
Continued
To audio output
Audio/video equipment
Connect the audio output jacks on the other equipment and the AUX
jacks on the rear, using an audio cord (not supplied).
Auxiliary Equipment
To video input
TV
When connecting Auxiliary Equipment
Connect the VIDEO OUT jack at the back panel of the System to
the video input jack on the TV via the supplied video cord.
Connect the AUX jacks to the output of Audio/Video equipment.
No audio signal is produced at the AUX IN jacks.
Connecting Auxiliary Equipment
You can connect an audio equipment – used only as a playback
device.
When you connect and use this equipment, refer also to its manual.
Be sure that the plugs of the audio cords are colour-coded:
White plugs and jacks are for left audio signals, and red ones for
right audio signals.
DO NOT connect any equipment while the
power is on.
DO NOT plug in any equipment until all
connections are complete.
VCR or other equipment
You can connect the following equipment to this system.
TV with a video input jack: used as a monitor of video CD
playback.
Audio/Video equipment.
To listen to this source, press AUX p, ~.
To connect audio equipment
EN1-5;MX-J333V/PM6 6/30/99, 2:22 PM5