Filter
Top Products
22
English
Continued
There are three timers available — Recording Timer, Daily Timer,
and Sleep Timer.
Before using the timers, you need to set the clock built in the unit.
(See page 7.)
Using Daily Timer
With Daily Timer, you can wake to your favorite music or radio
program.
How Daily Timer actually works
The unit automatically turns on, set the volume level to the preset
level, and starts playing the specified source when the on-time comes
(the indicator flashes just before the on-time, and continues
flashing while the timer is operating). Then, when the off-time comes
(“OFF” flashes just before the off-time), the unit automatically turns
off (Standby).
The timer setting remains in memory until you change it.
• There is a time limit in doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
• If you have made a mistake while setting timer, press CANCEL
/. (However, this does not always work. If CANCEL does not
work, press TIMER/CLOCK h repeatedly and start from step 1
again.)
On the unit On the unit
ONLY
::
1
Press TIMER/CLOCK h until “DAILY”
appears on the display.
TIMER
/CLOCK
The DAILY indicator also starts flashing on the display.
• Each time you press the button, the timer setting modes change
as follows:
DAILY
Cancelled
ON TIME
ON TIME
Clock
setting
The hour digit starts flashing
REC
2
Press TIMER/CLOCK h again.
“ON TIME” appears for 2 seconds, then the unit
enters on-time setting mode.
TIMER
/CLOCK
3
Set the on-time you want the unit to
turn on.
1) Press 4 ; or ¢ ; to set the hour, then
press SET k.
2) Press 4 ; or ¢ ; to set the minute, then
press SET k.
“OFF TIME” appears for 2 seconds, then the unit
enters off-time setting mode.
4
Set the off-time you want the unit to
turn off (on standby).
1) Press 4 ; or ¢ ; to set the hour, then
press SET k.
2) Press 4 ; or ¢ ; to set the minute, then
press SET k.
The unit enters source selecting mode.
PRESET
PREV
NEXT
PRESET
PREV
NEXT
5
Press 4 ; or ¢ ; to select the
source to play, then press SET k.
• Each time you press 4 ; or ¢ ;, the source
changes as follows:
PRESET
PREV
NEXT
SET
– CD – – –
TUNER FM
TUNER AM
TAPE
AUX
TUNER FM: tunes into a specified preset FM station. = go to
step 6.
TUNER AM: tunes into a specified preset AM station.
= go to step 6.
– CD – – –: plays a disc from a specified track of a specified
disc. = go to step 6.
• Make sure there is a CD on the selected disc
number tray.
TAPE: plays a tape in deck A or B. = go to step 7.
• Make sure that a tape is in the deck whose deck
indicator (A or B) is lit on the display.
• Make sure that the tape direction is correct.
AUX: plays an external source. = go to step 7.
• To use this setting, the external component has
to be equipped with the timer function.
6
When selecting “– CD – – –”.
1) Press 4 ; or ¢ ; to select the disc
number, then press SET k.
2) Press 4 ; or ¢ ; to set the track number,
then press SET k.
The unit enters volume setting mode.
When selecting “TUNER FM” or “TUNER AM”
Press 4 ; or ¢ ; to select the preset station number, then
press SET k.
The unit enters volume setting mode.
PRESET
PREV
NEXT
Using the TimersUsing the Timers
REC DAILY
S.MODE
REC DAILY
DAILY
S.MODE
DAILY
SET
SET
SET
EN22-29;MX-J333V/PM6 6/30/99, 2:24 PM22