Filter
Top Products
21
English
Auto Edit Recording
By using Auto Edit Recording, you can record the CD tracks to fit
the tape. Auto Edit Recording makes a program by selecting the CD
tracks in numerical order. However, to prevent the end of the last
track on the front side from being cut off, the last track is selected so
as to fit on the remaining tape length.
On the unit On the unit
ONLY:
1
Place a disc correctly on the circle of the disc tray,
with its label side up.
• If the current playing source is not the CD player, press CD
6 y, ), then 7 z, _ before going to the next step.
2
Press EDIT b.
EDIT
2 31
2 31
The optimum tape length for the disc appears.
Note: Auto edit can only be applied for current playing CD.
To change the tape length manually
If the tape length selected is not satisfactory, you can change the
tape length by pressing 4 ; or ¢ ;.
You can select the tape length among the following — 40, 46, 50,
54, 60, 64, 70, 74, 80, 84 and 90.
3
Press SET k.
2 31
9
13
10
14
11
8
12
Tracks to be recorded on
the reverse side (SIDE-B)
appear.
• Each time you press the button, the tracks to be recorded on
the front side (SIDE-A) and on the reverse side (SIDE-B)
alternate.
4
Put a recordable cassette of appropriate length into
deck B.
5
Press REVERSE MODE a so that the Reverse Mode
indicator lights up as .
• Without turning on the Reverse Mode ( ), recording will
stop when the front side of the tape is recorded.
6
Press CD REC START f.
The indicator lights up on the display.
Deck B starts recording then, about 10 second later, the CD player
starts playing.
When the recording is done, “CD REC FINISHED” appears on
the display, and the CD player and deck B stop.
• If a tape has not been rewind, deck B will rewind the tape
before it starts recording.
• A 10-second blank portion is automatically created at the
beginning of each side of the tape.
To stop during Auto Edit Recording
Press 7 z, _ or REC START/STOP s so that a 4-second
blank portion is created on the recorded tape. (Remember a 4-second
blank is important when using Music Scan — see page 18.)
To cancel Auto Edit Recording
• Press PROGRAM/RANDOM v before or after play. (The unit
enters Program, Random or Continuous Play mode.)
OR
• Press 0 e for the disc you have selected.
To remove the cassette, press EJECT 0 o for deck B.
EN19-23;MX-J555V/PM6 7/8/99, 9:07 AM21