JVC MX-J585V CD Player User Manual


 
5
English
Continued
VOLTAGE
SELECTOR
110V
127V
220V
230V 
-240V
ANTENNA
CD OPTICAL
DIGITAL
OUTPUT
AUX
AM EXT
FM
RIGHT
LEFT
IN
OUT
SUB WOOFER
OUT
FM
AM LOOP
(75 )
SPEAKERS
RIGHT
LEFT
VIDEO 
OUT
CAUTION:
SPEAKER IMPEDANCE
6 ~ 16
STEREO RECEIVER
MODEL NO. MX - J555V
UNIT NO. MX-J555V
AC 110/127/220
/ 230 - 240V
50/6
0Hz 85W
SUB WOOFER
OUT
To input
Connect the input jack of a powered subwoofer to the SUB
WOOFER OUT jack, using a monaural audio cord (not supplied).
DO NOT connect any equipment while the
power is on.
DO NOT plug in any equipment until all
connections are complete.
To connect a subwoofer
By connecting a subwoofer, you can enhance the bass.
VOLTAGE
SELECTOR
110V
127V
220V
230V 
-240V
ANTENNA
CD OPTICAL
DIGITAL
OUTPUT
AUX
AM EXT
FM
RIGHT
LEFT
IN
OUT
SUB WOOFER
OUT
FM
AM LOOP
(75 )
SPEAKERS
RIGHT
LEFT
VIDEO 
OUT
CAUTION:
SPEAKER IMPEDANCE
6 ~ 16
STEREO RECEIVER
MODEL NO. MX - J555V
UNIT NO. MX-J555V
AC 110/127/220 
/ 230 - 240V
50/6
0Hz 85W
VIDEO
OUT
AUX
RIGHT
LEFT
IN
OUT
Auxiliary Equipment
To video input
TV
To audio output
To audio input
Now you can plug the AC power cord into the wall outlet,
and your System is at your command!
When connecting Auxiliary Equipment
Connect the VIDEO OUT jack at the back panel of the System to
the video input jack on the TV via the supplied video cord.
Connect the AUX jacks to the audio input and output of Audio/
Video equipment.
The AUX OUT jacks will transmit audio signals from the selected
TAPE, CD or TUNER, to the connected equipment. No audio
signal is produced at the AUX IN jacks.
Connecting Auxiliary Equipment
You can connect both analog and digital equipment.
VCR or other equipment
You can connect the following equipment to this system.
TV with a video input jack: used as a monitor of video CD
playback.
Audio/Video equipment.
To listen to this source, press AUX p, ~.
EN5;MX-J555V/PM6-001B 7/8/99, 9:11 AM5