Filter
Top Products
5
~ AM/FM antenna
To assemble the AM loop antenna
To connect the AM/FM antenna
• Keep the AM loop antenna cable wrapped around the
AM loop antenna frame, otherwise the effectiveness and
sensitivity of the AM loop antenna may be reduced.
For better FM reception
Disconnect the supplied FM antenna, and connect to an
outdoor FM antenna using a 75 Ω wire with coaxial type
connector.
AM loop antenna (supplied)
Turn it until the best reception is obtained.
FM antenna (supplied)
Extend it so that you can obtain the best
reception.
FM outdoor antenna
(not supplied)
Ÿ Speakers
• When connecting the speaker cords, match the polarity
of the speaker terminals: red to (+) and black to (–).
• DO NOT connect more than one speaker to
each terminal.
• DO NOT push or pull the speakers as this
will damage the foot spacers at the bottom of
the speakers.
! Digital audio component
• Set “AUDIO OUT” in the “ ” menu correctly according
to the connected digital audio equipment (see page 32).
• The digital signal through the OPTICAL DIGITAL OUT
terminal is transmitted only when “DVD/CD” is selected
as the source.
CAUTION: SPEAKER
IMPEDANCE 6 16
RL
Insert Release
Red
Black
From right
speaker
From left
speaker
Press and hold
OPTICAL
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
Optical digital
cord (not
supplied)
Protective cap
White
Black
UX-L5V[U]6th.indb 5UX-L5V[U]6th.indb 5 09.4.2 11:08:29 AM09.4.2 11:08:29 AM