Filter
Top Products
35
Recording Operations (see pages 24 and 25)
• Do not vibrate the System while recording tracks. It may
damage the recorded tracks.
Daily Timer Operations (see pages 29 and 30)
Setting the Daily Timer:
• When you unplug the power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
• If you set DVD Video as the source, Daily Timer will not
work correctly.
• If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.
Setup Menu Operations (see pages 31 and 32)
General:
• If the upper and lower parts of the menu are cut off,
adjust the picture size control of the TV.
menu:
TV SYSTEM
• If you play back a PAL disc/file with the color system set
to “NTSC” you can watch the playback pictures, but the
following symptoms may occur:
– The items on the menu will be blurred, and be shown
slightly shifted when highlighted.
– The aspect ratio of the picture may differ from the
original aspect ratio.
– The picture movement is not smooth.
TV TYPE
• Even if “4:3 PS / 4:3 MULTI PS” is selected, the screen
size may become 4:3 letter box while playing a disc/file.
This depends on how the discs are recorded.
• When you select “16:9 / 16:9 MULTI” for a picture whose
aspect ratio is 4:3, the picture changes slightly due to the
process of converting the picture width.
menu:
• When the language you have selected for “MENU
LANG,” “AUDIO LANG,” or “SUBTITLE LANG” is
not recorded, the original language is used as the initial
language.
Maintenance
To get the best performance of the System, keep your discs
and mechanism clean.
Handling Discs
• Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the
disc.
• Put the disc back in its case after use to prevent warping.
• Be careful not to scratch the surface of the disc when
placing it back in its case.
• Avoid exposure to direct sunlight, extreme temperature,
and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center
to edge.
Cleaning the System
• Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean
with a dry cloth.
• Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:
– DO NOT wipe it with a hard cloth.
– DO NOT wipe it forcefully.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as
insecticides to it.
– DO NOT allow any rubber or plastic to remain in
contact for a long time.
UX-L5V[U]6th.indb 35UX-L5V[U]6th.indb 35 09.4.2 11:08:44 AM09.4.2 11:08:44 AM