JVC LVT1218-005A Stereo System User Manual


 
26
Convenient Functions
NOTE
During operation, you can return to the previous
step by pressing . You can quit the playback
timer settings by pressing . The settings are
not stored.
When the playback timer starts, the volume grad-
ually increases to the selected level.
In step 2 on page 25, select the timer number you
want to cancel, and then press .
Even when you cancel the playback timer, the set-
ting remains stored.
In step 2 on page 25, select the timer number you
want to activate, and then press repeatedly
until all of the setting procedure finishes. Then turn
off the main unit.
NOTE
When you want to activate two or three playback
timers, leave a blank time of 2 or more minutes
between the ending time of the first playback timer
and the starting time of the second playback timer.
If the blank time is less than 2 minutes, the second
playback timer does not work.
When the power plug is disconnected or the
power is cut, the playback timer settings may be
lost. If the settings are lost, set the clock and
playback timer again.
CD Ejection Lock
You can prohibit ejection of a CD.
When the main unit is turned off
While holding down , press
on the main unit.
Even if you press , "LOCKED" appears in the
display window and the CD does not come out.
In addition, when you press , while the main
unit is turned off, "LOCKED" appears in the display
window and the main unit does not turn on.
When the main unit is turned off
Carry out the operation explained above once
again.
Canceling the playback timer
function
Activating the playback timer again
Canceling the CD ejection lock
UX-Q3[A].book 26 ページ 2004年9月8日 水曜日 午前11時15分