Filter
Top Products
17
(Continued)
Listening to CDs
Press the number buttons to select
the track you want to listen to.
• Refer to "Using the number buttons" ( page
10).
This function allows you to repeatedly listen to the
same track.
During CD playback, press repeat-
edly to select the repeat mode.
• Each time you press , the display toggles as
follows.
Example: While "REPEAT ALL" is selected
NOTE
• Ejecting the CD or turning off the main unit also
cancels repeat playback.
This function allows you program up to 50 tracks.
1
Press , and then press .
2 Press to select "PROGRAM".
3 Press the number buttons to
select the track numbers.
• Refer to "Using the number buttons" (
page 10).
For CDs
For MP3s
NOTE
• When you want to erase the program, press
while playback is stopped. Programmed tracks are
erased one by one from the last track. Holding
down erases all programmed tracks.
• When you try to program the 51st track, "MEM-
ORY FULL" appears in the display window to
indicate that 51 or more tracks cannot be pro-
grammed.
• When total time for program playback reaches 1
hour 40 minutes, "--:--" appears.
• When you program tracks from an MP3, the total
time is not displayed.
4 Press .
Specifying the Track (Direct
Track Selection)
Repeat Playback
Repeat indicator
: For repeating all tracks in a disc.
: For repeating one group (only
for MP3s).
: For repeating one track.
: For canceling repeat playback.
Program Playback
Program indicator
CD or MP3
Track number Program number
Total time for program playback
Track number
Program number
UX-Q3[A].book 17 ページ ２００４年９月８日 水曜日 午前１１時１５分