Filter
Top Products
48
ENGLISH
• It takes a long time to download an animation.
– About 3 to 4 seconds for a still image (one
frame).
– About 1 to 2 minutes for an animation of 30
frames.
– About 4 minutes for an animation of 90
frames.
• If a disc inserted does not include any <jll>
and <jla> files, beeps sound when you try to
operate the downloading procedure.
• If you try to store a 31st image for picture
screen, “Picture Full” appears and you cannot
start downloading. Delete unwanted files
before downloading.
• If the total frame number of an animation
downloaded exceeds the following number,
the frames exceeding that numbers are
ignored.
– For “OPENING” and “ENDING”: 30
– For “MOVIE”: 90
General Settings—PSM
• “Auto Dimmer” may not work correctly on
some vehicles, particularly on those having a
control dial for dimming. In this case, change
the “Dimmer” setting to any one other than
“Auto.”
• If “LCD Type” is set to “Auto,” the display
pattern will change to the “Negative” or
“Positive” pattern depending on the
“Dimmer” setting
• If you change the “Amp Gain” setting from
“High PWR” to “Low PWR” while the
volume level is set higher than “Volume 30,”
the unit automatically changes the volume
level to “Volume 30.”
Other Main Functions
Assigning titles to the sources
• When you try to assign a title to a 41st disc or
to a 31st station frequency, “Name Full”
appears and you cannot enter the text entry
mode. Delete unwanted titles before
assignment.
• When the CD changer is connected, you can
assign titles to CDs in the CD changer. These
titles can also be shown on the display if you
insert the CDs in this unit.
Numbers and symbols
Characters shown on the display
In addition to the Roman alphabets (A – Z,
a – z), the following characters will be used
to show the various information on the
display.
• You can also use the following characters
to assign titles (see page 35).
Lower case
Upper case
45-51_KD-AR_LHX5000[J]f.p65 1/27/04, 9:23 PM48