Filter
Top Products
– 20 –
To continue searching after the first stop, press PTY
SEARCH again (while holding RDS CONTROL) when the
selected PTY code in the main display is flashing.
To stop searching any time during the process, press
PTY SEARCH (while holding RDS CONTROL) when
searching.
Switching to a Program Type of Your Choice
Temporarily
The Enhanced Other Networks function allows the unit to
switch temporarily to a broadcast program of your choice
(TA, News, or Info) from a different station except when
you are listening to a non-RDS station—some FM stations
and AM (MW/LW) stations.
• Enhanced Other Networks function is applicable only to
the preset stations.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step
1
again.
On the remote control ONLY:
1
While listening to an FM station, press and hold
RDS CONTROL until you finish the following
procedure.
2
Press TA/News/Info.
“EON SELECT” appears in the main display.
3
Press PTY SELECT + or – to select the Enhanced
Other Networks data type you want.
The name of the selected Enhanced Other Networks
data type starts flashing in the main display.
• Each time you press the button, the Enhanced Other
Networks data types change as follows:
TA: Traffic announcement
News:News
Info: Programs the purpose of which is to impart
advice in the widest sense.
OFF: The Enhanced Other Networks function is
canceled.
How the Enhanced Other Networks function
actually works:
CASE 1
If there is no station broadcasting the program you
have selected
The unit continues tuning in to the current station.
«
When a station starts broadcasting the program you
have selected, the unit automatically switches to the
station. The received PTY code starts flashing in the
main display.
«
When the program is over, the unit goes back to the
previously tuned station, but the Enhanced Other
Networks function still remains activated.
CASE 2
If there is a station broadcasting the program you
have selected
The unit tunes in to the program. The received PTY
code starts flashing in the main display.
«
When the program is over, the unit goes back to the
previously tuned station, but the Enhanced Other
Networks function still remains activated.
OFF
TA
News
Info
(canceled)
4
Press TA/News/Info again.
The indication disappears.
Now, this function is activated. See “How the Enhanced
Other Networks function actually works” below.
5
Release your finger from RDS CONTROL.
To cancel the Enhanced Other Networks function, select
“OFF” in step
3
.
• If you cancel the Enhanced Other Networks function
while receiving a program selected by the Enhanced
Other Networks function, the unit goes back to the
previously tuned station.
• The Enhanced Other Networks function is canceled
when you change the source to “CD,” “MD” or “TAPE,”
while it is temporarily canceled when you change the
source to “AM.”
• The Enhanced Other Networks function is also canceled
when you turn off the unit.
EN16-21UX-Z7MDR[B]f 02.6.28, 13:4720