Filter
Top Products
– 18 –
4
Press SET again.
“STORED” appears in the main display for a while.
The tuned station in step
1
is stored in the preset
number selected in step
3
.
• Storing a new station on a used number erases the
previously stored one.
When you unplug the AC power cord or if a power
failure occurs
The FM and AM (MW/LW) preset stations will be erased in a day.
If this happens, preset the stations again.
Tuning in to a Preset Station
On the remote control ONLY:
1
Press FM/AM/AUX to select either “FM” or “AM.”
When you press the button for the first time, the unit
automatically turns on with the last selected source.
• Each time you press the button, the source changes as
follows:
2
Press the number buttons to select a preset number.
Ex.: For preset number 5, press 5.
For preset number 15, press +10, then 5.
For preset number 20, press +10, then 10.
For preset number 30, press +10, +10, then 10.
Receiving FM Stations with RDS
RDS allows FM stations to send an additional signal along
with their regular program signals. For example, the
stations send their station names, as well as information
about what type of program they broadcast, such as sports
or music, etc.
When tuned to an FM station which provides the RDS
service, “RDS” appears in the main display.
With the unit, you can receive the following types of RDS
signals.
PS (Program Service):
Shows commonly known station names.
PTY (Program Type):
Shows types of broadcast programs.
RT (Radio Text):
Shows text messages the station sends.
Enhanced Other Networks:
Provides the information about the types of the
programs sent by other RDS stations than the one
being received.
RDS operations are possible only using the remote
control. You must press and hold RDS CONTROL
while using the buttons printed in orange on the remote
control—PTY SEARCH, TA/News/Info, DISPLAY,
PTY SELECT + and PTY SELECT –.
More about RDS
• Not all FM stations provide RDS signals, nor do all RDS
stations provide the same services. If in doubt, check with local
radio stations for details on RDS in your area.
• RDS may not work correctly if the received station is not
transmitting the signals properly or if the signal strength is
weak.
FM
AM
AUX
EN16-21UX-Z7MDR[B]f 02.6.28, 13:4718