Filter
Top Products
19
English
Receiving Radio Broadcasts
Selecting the FM Reception Mode
You can change the FM reception mode while receiving an FM broadcast.
On the front panel
only
:
1. Press TUNER/BAND so that the Control
%%
%%
% /
fifi
fifi
fi /
@@
@@
@ /
##
##
# buttons work for tuner settings.
The lamp above the button lights up.
2. Press Control
%%
%%
% /
fifi
fifi
fi until “FM MODE” appears on
the display.
3. Press Control
@@
@@
@ /
##
##
# to select either “FM AUTO” or
“FM MONO.”
• Normally select “FM AUTO.”
• When an FM stereo broadcast is hard to receive or
noisy, select “FM MONO.”
FM AUTO: When a program is broadcast in stereo, you will hear stereo sound;
when in monaural, you will hear monaural sounds. This mode is
also useful to suppress static noise between stations.
The MUTE AUTO indicator lights up on the display.
FM MONO: Reception will be improved although you will lose the stereo
effect. In this mode, you will hear noise while tuning into the
stations.
The MUTE AUTO indicator goes off on the display.
TUNER/BAND
Note:
You can store the FM reception
mode for each preset station.
EN01-19.RX-60VGD[UF]/F 98.8.27, 5:15 PM19