Filter
Top Products
7
ENGLISH
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢ or 4 until
“M (manual)” starts flashing on the
display.
Lights up when receiving
an FM broadcast in stereo.
MO
MO
RND
FM1 FM2 FM3 AM
AM
FM1 FM2 FM3
KS-FX725R
Selected band appears.
KS-F525
3
Tune in to a station you want while “M”
is flashing.
• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals (87.5
MHz – 108 MHz), in 30 KHz intervals (65
MHz – 74 MHz) for FM and 9 kHz intervals
for AM – MW/LW) until you release the
button.
When an FM stereo broadcast is hard to
receive:
Press MO RND (for KS-FX725R) or MO (for KS-
F525) while listening to an FM stereo broadcast.
• Each time you press the button, the MO
indicator lights up and goes off alternately.
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved (the ST indicator
goes off).
To restore the stereo effect, press the same
button again.
KS-FX725R
KS-F525
Press 4 to tune
in to stations of lower
frequencies.
Press ¢ to tune
in to stations of higher
frequencies.
EN06-09KS-FX725R_F525[EE]f.pm5 7/12/01, 9:50 AM7