Filter
Top Products
20
ENGLISH
Turning on/off the loudness
function
(only for KS-F525)
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these
frequencies to produce a well-balanced sound at
low volume levels.
Each time you press LOUD, the loudness
function turns on and off alternately.
Note:
For KS-FX725R, you can turn on/off the loudness
function using the SEL button and the control dial (see
page19).
Using the sound control memory
You can select and store a preset sound
adjustment suitable for each playback source
(Advanced SCM).
Selecting and storing the sound modes
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, tape
and external components.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the sources,
see “To cancel Advanced SCM – SCM LINK” on
page 25.
Select the sound mode you want.
Each time you press the button, the sound mode
changes as follows:
Ex.: When you select “BEAT”
LOUD
BEAT
SOFT POP
SCM OFF
EN19-22KS-FX725R_F525[EE]f.pm5 7/12/01, 9:52 AM20