Filter
Top Products
22
ENGLISH
Storing your own sound
adjustments
You can adjust the sound modes (BEAT, SOFT,
POP) to your preference and store your own
adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Call up the sound mode you want to
adjust.
• See pages 20 and 21 for
details.
2
For KS-FX725R:
1 Select “BAS (bass),” “TRE (treble),” or
“LOUD (loudness)”.
2 Adjust the bass or treble level or turn the
loudness function ON/OFF.
For KS-F525:
1
2
To adjust the bass or treble level.
1 Select “BAS” or “TRE”.
2 Adjust the bass or treble level.
To turn on the loudness function.
Each time you press LOUD,
loudness function turns on and
off alternately.
1
2
LOUD
3
Repeat step 2 to adjust the other
items.
4
Press and hold SCM until the sound
mode you have selected in step 1
flashes on the display.
Your adjustment made for the
selected sound mode is stored in
memory.
5
Repeat the same procedure to store
other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the
preset values listed in the table on page 21.
EN19-22KS-FX725R_F525[EE]f.pm5 7/12/01, 9:52 AM22