Filter
Top Products
6
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
Press ¢
to search
stations of higher
frequencies.
Press 4
to search
stations of lower frequencies.
Selected band appears.
AM
FM1 FM2 FM3
To stop searching before a station is received,
press the same button you have pressed for
searching.
Note:
FM1 and FM2 : 87.5 MHz – 108.0 MHz
FM3 : 65.00 MHz – 74.00 MHz
Searching a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold ¢ or 4
until “M (manual)” starts flashing on
the display.
MODE
SCM
MO
RPT
Selected
band appears.
Lights up when receiving an
FM stereo broadcast with
sufficient signal strength.
AM
FM1 FM2 FM3
EN06-08.KS-F545[EE]f 1/14/03, 5:02 PM6