Filter
Top Products
10
ENGLISH
Prohibiting cassette ejection
You can prohibit cassette ejection and can “lock”
a cassette in the cassette compartment.
While holding TAPE 23, press 0 (eject) for more
than 2 seconds. “NO EJECT” flashes on the
display for about 5 seconds, and the cassette
is “locked.”
To cancel the prohibition and “unlock” the
cassette, While holding TAPE 23, press 0
(eject) for more than 2 seconds again. “EJECT
OK” flashes for about 5 seconds, and this time
the cassette is “unlocked.”
Note:
If you press 0 while cassette ejection is prohibited,
the cassette will not be ejected.
Finding the beginning of a tune
Multi Music Scan allows you to automatically start
playback from the beginning of a specified tune.
You can specify up to 9 tunes ahead of or before
the current tune.
During playback
Specify how many tunes ahead of or
before the current tune the one you want
is located.
Each time you press the buttons, the number
changes up to ±9.
When the beginning of the specified tune is
located, playback starts automatically.
Notes:
• While locating a specified tune:
– If the tape is rewound to its beginning, playback
starts from the beginning of that side.
– If the tape is fast-forwarded to the end, it is
reversed and played from the beginning of the
other side.
• In the following cases, the Multi Music Scan
function may not operate correctly:
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions between
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level of noise or humming between
tunes.
Press ¢ to locate a tune
ahead of the current tune on
the cassette.
Press 4
to locate a tune
before the current tune on the
cassette.
EN09-11.KS-F545[EE]f 1/14/03, 5:03 PM10