Filter
Top Products
53
ENGLISH
DAB1 DAB2
DAB3
Hold
Using the Standby Reception
You can use three types of Standby Reception.
• Road Traffic News Standby Reception
• Announcement Standby Reception
• PTY Standby Reception
Using Road Traffic News Standby
Reception
Road Traffic News Standby Reception allows
the unit to switch temporarily to Road Traffic
News (or Traffic Announcement) from any
source except AM.
• If a Road Traffic News (or Traffic
Announcement) starts broadcasting, “Traffic
News” appears and the unit tunes in to the
service (or FM RDS station) broadcasting
Road Traffic News (or Traffic
Announcement). The volume changes to the
preset TA volume level (see page 40).
To activate Road Traffic News Standby
Reception (and TA Standby Reception):
•
If the TP indicator lights up, Road Traffic
News Standby Reception (or TA Standby
Reception) is activated.
– When a service which is supporting Road
Traffic News is received. This unit now
stands by for the Road Traffic News signal
reception—Road Traffic News Standby
Reception.
– When a service which is not supporting
Road Traffic News signal is received. This
unit now stands by for the TA signal
reception—TA Standby Reception (see
page 16).
Tuning in to a preset service
Using the remote controller, you can easily tune
in to a preset service.
1
2
Select a preset number (1 – 6).
To select a preset service using the
Preset Service List
1
While listening to a service...
• Service Labels are shown on the list.
2
Select a preset number.
• If you press 4/¢ (
/ ), you can
move to the lists of the other bands.
To exit from the Preset Service List, press
MENU again.
TP indicator
(either lights up or flashes)
TP/PTY
To be continued...
50-57_KD-SHX701_f.p65 4/1/04, 1:17 PM53