JVC KD-SC800R CD Player User Manual


 
29
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Remedies
Adjust it to the optimum level.
Check the cords and
connections.
Press the reset button on the
panel holder after detaching the
control panel. (The clock setting
and preset stations stored in
memory are erased.)
(See page 2.)
Store stations manually.
Connect the aerial firmly.
Insert the CD correctly.
Insert a finalized CD-R/
CD-RW.
Finalize the CD-R/CD-RW
with the component which
you used for recording.
Unlock the CD. (See page 19.)
Stop playback while driving on
rough roads.
Change the CD.
Check the cords and
connections.
Insert a CD into the loading slot.
Insert the CD correctly.
Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Signals are too weak.
The aerial is not connected
firmly.
CD is inserted upside down.
CD-R/CD-RW is not finalized.
CD is locked.
You are driving on rough
roads.
CD is scratched.
Connections are incorrect.
No CD is in the loading slot.
CD is inserted incorrectly.
Symptoms
Sound cannot be heard
from the speakers.
This unit does not work at
all.
SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
Static noise while listening
to the radio.
CD cannot be played back.
CD-R/CD-RW cannot be
played back.
Tracks on the CD-R/CD-RW
cannot be skipped.
CD cannot be ejected.
CD sound is sometimes
interrupted.
“NO DISC” appears on the
display.
CD Playback
General
FM/AM
EN29-31_KD-SC800R[E_EX]f.p65 1/13/03, 2:57 PM29