Filter
Top Products
9
ENGLISH
RDS (Radio Data System)
Using RDS functions in the FM band
To select Network-Tracking mode, press the RDS button for more than 1
second.
• Mode 1 (AF (Alternative Frequencies): on/REG: off):
Network-Tracking is activated.
Switches between stations belonging to the network being received.
Note:
• In Mode 1, the broadcast may switch between different programmes
even within the same network at certain times.
• Mode 2 (AF: on/REG: on):
Network-Tracking is activated and Regional mode is engaged (switches
between stations broadcasting the same programme, at all times).
• Mode 3 (AF: off/REG: off):
Network-Tracking is deactivated.
RDS button
TP /RDS
Programme 1 broadcasting on
frequency B
Programme 1 broadcasting
on frequency A
Programme 1 broadcasting on frequency E
Programme 1 broadcasting on frequency D
Programme 1 broadcasting on frequency C
The same programme can be received on different frequencies.
Network-Tracking reception
When driving in an area where the signal strength drops, the tuner
automatically uses PI (Programme Identification) and AF codes to retune to
the same programme with a stronger signal from another RDS station in the
network. By utilizing these codes, you can continue to listen to the same
programme in its finest condition, no matter where you drive. (See illustration.)
• When the RDS station to which you are tuned does not provide AF data or
the unit is unable to receive AF data for any reason, Network-Tracking
reception will NOT operate even when the signal strength drops below the
reference level.