Filter
Top Products
16
Selecting FM reception sound
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo broadcast. The sound you
hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
Lights up when receiving an FM broadcast in stereo.
Other convenient tuner functions
ST
MO
Display Button
The DISP button is used to select the
Operation (Tuner or CD) and Clock modes.
Each time the button is pressed, the display
changes as follows:
Operation mode (Station name* = Frequency
being received = PTY; or CD) = Clock time.
The display returns to the initially preset mode
after a short while.
* When the RDS or PTY signal is weak or
when not tuned to an RDS or PTY station,
the Station name or PTY is NOT displayed.
Display Mode
Setting the main display mode.
1. Press the SEL button for more than 2
seconds to set the preferred setting mode.
2. Select “DISPMODE” with the ¢
or
4
button.
3. Select the desired mode with the + or -
button.
(Station name (PS NAME) Ô Frequency
being received (FREQ) Ô Clock time
(CLOCK) Ô) (See page 25.)
Note:
When the “CLOCK” mode is set, clock time
remains on the main display even during playback.
MO/RND